Your Search: "hollywood rack"

Sunlite's versatile 3-Bike Trunk Rack carries three bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

Sunlite's versatile 4-Bike Trunk Rack carries four bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Sunlite's versatile 2-Bike Trunk Rack carries two bikes and fits almost any vehicle. Positive locking straps attach the rack to your car and provide fast, simple installation. Vinyl-coated hooks and arms protect your bike and your car's finish. And when not in use, this rack folds flat for storage.

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).

Easy-to-install foot for Thule Edge roof racks, for vehicles with flush railings. - Easy-to-install roof rack feet - For vehicles with flush railings - For Thule Edge roof rack systems Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Simple. Reliable. American-Made. This entry-level 3-bike trunk rack gets you where you want to go. No frills, no complications—the Guardian is as simple as can be, without sacrificing security. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit to keep precious cargo secure during transit. Plus, the Guardian 3-bike comes completely assembled and ready to go, right out of the box. What more could you ask for in a bike rack? Features - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.

The flexible design fits more bikes than any other hitch rack in its price range. - Fits nearly all bike styles including 16-29" wheels, up to 5" wide tires, and wheelbases up to 52" right out of the box - Adjusting, installing and removing requires minimal effort, as it is one of the lightest platform hitch racks on the market at only 37.5 lbs - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Lock the bikes to the rack and the rack to the receiver keeping everything safe during transport or when parked - Easily transfers between 1.25" and 2" hitch receivers

Here's a big basket to carry large loads. Sunlite's Rack Top Wire Basket attaches to your rear rack (sold separately) and sports sturdy steel construction.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Let Us Do the Lifting If you’re searching for the ultimate bike rack for eBikes, look no further than the Saris Door County. Powered by your vehicle’s 7-pin connection, the Door County is a full-service electric bike rack for electric bikes. Simply turn the key and press a button, and the Door County platform hitch rack effortlessly lifts eBikes into the transport position, and back down again. And when you’re on the road, the Door County keeps the electric vibe going with glowing tail lights, including running, brake and turn signals. As for your precious two-wheeled cargo, the Saris Door County can transport two bikes, up to 60 lb. per bike, and sports integrated locks. The Door County’s unique lobster claw-style bike holds easily adjust to accommodate common electric bike features, such as fenders and down-tubemounted batteries. Ferocious in name only, the Door County’s lobster bike claws are gentle on your bike’s paint and ensure peace of mind as you travel down the road. And when you’re ready to call it a day, the Door County folds for storage and convenient wheels make it easy to roll away. - Full-Service Hitch Rack: raises and lowers bikes with electric lift assist, eliminating the need to manually lift heavy eBikes. - eBike Friendly Bike Holds: unique “lobster claws” securely hold bikes without touching fenders or eBike battery mounts. - Complete Integrated Security: locks the rack to the car and the bikes to the rack, plus tail lights for enhanced visibility. - Roll & Ride: folds for compact storage and maneuvering, while built-in wheels make it easy to roll into place. - For use with 2” hitch receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). Bike Capacity - Carries 2 bikes, up to 60 lb/each. - This rack fits a wheelbase of up to 48". - Compatible with bike tires up to 3". Product Design - Electric platform style hitch rack. - For use with 2” receivers only. (Not approved for use on RVs or tow-behind RVs and trailers). - Electric system raises and lowers bikes with rack-mounted turn-key controls and buttons. - Electric system powers tail lights (running, brake, turn signals) for extra visibility. - Electric system connects to vehicle via 7-pin bladed connection. - Lobster claw-style locks the bike by the frame, ideal for bikes with fenders or eBikes with down-tube mounted batteries. - Integrated locking secures rack to the car, and bikes to the rack. - Tilting feature allows access to rear of vehicle, even when fully loaded. - Rack trays fold inwards for compact storage. - Integrated wheels allow rack to be maneuvered when folded. - Wheel straps are provided for front and rear wheel for extra peace of mind. - 1-year warranty for electronics Product Dimension - Rack weight: 63 lb.

Sleek and versatile fork-mounted bike rack that offers convenient transport for Quick-release bikes. - Easily mount standard Quick-release bikes (9mm). Fits Thru-axle bikes (9-15mm) and 20x110mm Thru-axle bikes with additional adapters (sold separately) - Accommodates bikes with disc brakes - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to the audible confirmation of correct mounting - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other - Adjustable protective wheel strap holds the rear wheel securely in place - Mounts to all Thule rack systems, round bars, and most factory racks

Thule T2 Pro XTR is a premium bike rack for demanding bike enthusiasts. With time-tested durability and award-winning design, this robust bike rack is ready for a wide variety of bike styles, including e-bikes. Hassle-free design Thule T2 Pro XTR has loads of features that make it easy to attach, use, remove, and store. From the tool-free AutoAttach system to the integrated wheels that help maneuver the rack to and from the vehicle, each detail has been carefully engineered, allowing you to focus on getting out and enjoying the ride. Extreme testing At our state-of-the-art Thule Test Center, we put the Thule T2 Pro XTR through the most demanding tests on the market. After using our specially designed test equipment to simulate the rack driving around the world twice, we then expose it to extreme heat, cold, and real-world road tests to ensure we deliver the most durable rack out there. Features: - Versatile design fits nearly all styles of bikes up to 60 lbs with zero frame contact - AutoAttach system makes installation and removal simple and tool-free - Integrated wheels help to maneuver the rack on and off the vehicle - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Fits 20-29" wheels and up to 5" tires without adapters making it ideal for carbon frames, mountain, downhill, or fat bikes - Integrated cable lock and lock knob locks bikes to the rack and secures the rack to the receiver - Generous spacing between bike mounts with the ability to adjust side to side to eliminate bike interference

Do you need to run into the store but not bring all your stuff along? Then lock it in the Locking Rack Bag. It is made of hard plastic and has a rear reflector. It easily mounts to your rear rack.

Features - Required fender mounting bracket when installing the Rack-It Metro E rack to E-Bikes with fenders - Provides the needed support for the rear fender when upgrading to the Rack-It Metro E Rack

- SnugTite Stinger positions the rack securely into the hitch receiver - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Ratcheting arm and wheel tray secure bikes quickly without frame contact - Easily adjustable trays move side to side to create generous spacing between the bikes - Tool-free AutoAttach system makes it easy to install and remove the bike rack - Fits carbon frames, mountain bike, downhill bikes, 20—29" wheels, and up to 3" tires without adapters. Fat bike adapter kit sold seperately - Includes the Thule One Key System to lock the rack to the vehicle - Maximum bike weight is 50 lbs / 23kg per bike

Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.

Pack up the car with your riding buddies and head out to cycling fun with Sunlite's HB-426 2-inch Receiver Rack. It carries up to four bikes and mounts easily to your vehicle's 2-inch receiver. Tough and stable, the HB-426 holds your bikes in place on two carry arms that accommodate a wide range of frame styles and designs, while the tie-down cradle system ensures each bicycle stays in place during travel. The rack tilts back so you can access your vehicle's cargo space, and the no-wobble bolt eliminates movement of the rack inside the hitch. That means you get a tough rack ready for endless road tripping miles.

Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.